Intelligent Fresh Meat Poultry Portion Cutter Machine
Intelligent Fresh Fish Portion Cutter CUT28-IV
The two-dimensional measurement of irregular meat is used,analytical calculation by software, which can get the product cutting length and do multiple degrees cutting. Then it can make sure each piece with same weight after cutting or other required weight.
It can be applied with fresh raw meat (Thaw), meat thickness ≤50mm, mainly apply with fish and poultry meat cutting, such as fish fillet, fish steak, chicken meat, chicken steak etc.
Application:
1.Cutting required euqal weight product.
2.Remove the tail and head and with equal weight cutting.
3.Remove the tail and head which does not meet the size requirements, cutting the meat according to the specified width,size and recipe weight.
Features:
1.The two-dimensional measurement of irregular meat is used,analytical calculation by software to make sure product cutting weight.
2.High precision cutting, Weight error ≤2%.
3.Cutting parameters can be adjusted easily, directly operated by touch screen.
4.Multiple cutting angles 45 or 90 degree.
5.It can be applied with different blades depend on different meat;Apply Europe Standard blade for process.
6.Adopting imported module type belt, Long service life.
7.Adopting SIEMENS electrical parts, with CE approved safety protection device.
8.Adopting 304 stainless steel and engineering-plastics, Easy to clean. HACCP standard easy operation, low maintenance cost.
Technical Parameters
|
Model |
CUT28-IV |
|
Belt width |
254mm |
|
Belt speed |
5~20m/min |
|
Weight error |
≤2% |
|
Cutting speed |
1000 cuts/min |
|
Max.product height |
50mm |
|
Max.product length |
650mm |
|
Max.product width |
240mm |
|
Input/Output height |
1050±50mm |
|
Power |
7.55kw |
|
Overall dimension |
2512x1200x1680mm |
Breading Machine (Crumbing Machine)SXJ200- II
Breading machine SXJ200-can evenly coat the meat like chicken,beef pork, meat and seafood by outpouring the crumb from the hopper when the products is carried by the belt pass under it. For the bottom coating, there is a layer of crumb on the lower belt. Also there is a roller pressing system to press tightly the crumb onto the surface of the food and the thickness of crumb can be regulated by this unit too.
1.Both fine and coarse crumb suitable
2.Easy operation and cleaning
3.Powerful blower and vibrator can easily remove the excess flour.
Preduster(Flouring Machine)SFJ200- II
The conveyor belt carries the products on to a floor bed, above where a hopper above can offer a layer of flour, this makes the products thinly and evenly coated to make preparation of the next processing step. And it can be joined to the battering machine and breading machine to make different production lines to finish the processing of predusting-battering-predusting,battering-predusting and battering-predusting-breading. etc different procedures. It can predust all around the products, completely even.
Powerful blower and vibrator can easily remove the excess flour.
The pressing roller design can help to coat the products and can regulate the thickness of the coating.
Our Service:
1) Free samples engraving and cutting.
2) Two years warranty.
3) Free technical training.
4) Installation and commission support.
5) 24 hours on-line service.
6) Telephone service.
7) Prompt delivery.
8) English version user manual and operation video.
FAQ:
1.Are you a factory or trading company?
We are the manufacturer and we have morethan10 years factory experience.As only the machine made by ourself,quality can be trusted,and most important thing is we can do better service after sales.we know how to fix the problem in each parts easliy.so welcome to visit to our factory
2. How long is the delivery time?
For standard machines, it would be 7-10 days; For non-standard machines and customized machines according to client s specific requirements, it would be 15 to 30 days.
3. How should I pay for my order? what is the procession of this purchase?
You can do 30% prepayment at first, then we will start to make production.
when the machine is ready , we will take pictures to you, and then you can do the balance.
after we got your payment. We will send the machine to you.
4. How about your service after sales? Can your engineer speak fluent english?
We offer the service from you got the machine,including how to install the machine,
how to use machine. how to let machine work.and so on. usually we will teach you how to do by emailor by skype.our engineer has many years of experience for cnc machine service.he can speak very goodenglish,so he can slove the problem in short time.
5. How about the documents after shipment?
After shipment,well send all original documents to you by DHL, including Packing List,
Commercial Invoice, B/L, and other certificates as required by client.
Packing and shipping:
Every machine is packed with great care and tough material. It is packed with cling films first and then film bags. At last, it is packed with wooden case which is reinforced with the iron bar on the top and bottom With this kind machine, all our laser machine can protect well during long trip by sea or by train.We can transport machine by boat or by training, according to your requirement.
Audited Supplier 
){kind=link}